Intellicom Innovation AB

Support

Support » Download File

Download File - Support

Netbiter Config

Netbiter Config

Software: Netbiter Config
Version:1.3.1
Operating system: Microsoft Windows XP/Vista

New in version 1.3.1
Potential security flaw corrected.

About the Netbiter Config utility
The Netbiter Config utility is a PC-based configuration utility to set TCP/IP network settings in the Netbiter. This utility has the ability to scan the Ethernet network for connected Netbiter devices and let the user set IP-address, net mask, gateway, DNS and hostname for each unit.

Installation Procedure
Extract the zip archive and run Setup-NetbiterConfig.exe and follow the onscreen instructions.

Scanning for connected devices
First ensure that you have connected the Netbiter device devices you want to install to the same Ethernet network as the PC is connected to. Use standard Ethernet cables, straight-through, to connect Netbiter® WS100 to a hub or switch, and a cross-over cable when connecting directly to a PC.
The Wink button is used to identify a Netbiter device that is connected to the network. The Module status LED will start wink green/red.
When the Netbiter Config utility is started, it will scan the Ethernet network for Netbiter® WS100 devices. All detected devices will be presented in a list in the main window. If you want to force a new scan for devices, you can press the Scan button.

IP IP address of the Netbiter® WS100
SN Subnet mask
GW Default gateway
DHCP Dynamically assigned IP address On/Off
Version Version of the application-software
Type Product type
MAC Ethernet MAC address of the Netbiter® WS100

Changing IP settings
To change IP settings on a detected device, double-click on the device you want to configure in the list of devices. This will open up a dialog where you can enter the desired IP configuration. To obtain necessary information about IP address, subnet mask etc, please contact your network administrator.
Default password for authentication of the new settings is admin and has to be entered to save changed made in Netbiter Config utility.

Host Name Here you can enter a hostname of your device.
IP Address The Netbiter® WS100 IP address.
Subnet mask Mask network
Gateway The default gateway in the network
Primary DNS The primary Domain Name Server
Secondary DNS The primary Secondary Name Server (if it exists)

Pressing Set will cause the Netbiter® WS100 to reboot and after that the new settings will be enabled.

Netbiter Config

1.3.1

2009-12-18

Products

Netbiter webSCADA WS100

Netbiter webSCADA WS200

Netbiter EasyConnect EC220

Netbiter MB100

Netbiter SS100

Netbiter I/O Extender

LonWorks - LiteConnector

LonWorks - LMS

Latest news

Mechanical drawings of Netbiter
We have published mechanical drawings of some of the Netbiter products, that are found as a Datasheet (under menu option Documentation) for the product. - [23/03]

Better history for your support issues
Intellicom Support will improve the handling of support issues. This will reduce the response time, and ensure better quality. We will continue our work to improve Intellicom Support. - [08/03]

More news

All Web site design, text, graphics, the selection and arrangement thereof, and all software compilations, underlying source code, software (including applets) and all other material on this Web site are copyright Intellicom Innovation AB and its affiliates, or their content and technology providers and copying or altering thereof is expressly forbidden without prior written consent.
ALL RIGHTS RESERVED.