Released: 2009-05-05
Version: 3.30.4 b277
Required kernel:kernel-v9

Release notes
Netbiter.net requires this version. For Netbiter webSCADA with firmware version 3.20 and earlier a new Activation Code must be requested from Intellicom Innovation. Use the support form and provide the Netbiter WS100/WS200 MAC address.

The Application Note describes the update process is found here.


Please, see changelog for details about the release. More

Released: 2009-05-05
Version: 3.30.4 b277
Required kernel:kernel-v9

Release notes
Netbiter.net requires this version. For Netbiter webSCADA with firmware version 3.20 and earlier a new Activation Code must be requested from Intellicom Innovation. Use the support form and provide the Netbiter WS100/WS200 MAC address.

The Application Note describes the update process is found here.


Please, see changelog for details about the release.

Changelog
------------------------------------------------------------------------------------------------------------
Version 3.30.4
------------------------------------------------------------------------------------------------------------
Features:

• Added command for(Continous Network Search) to Modem init.

------------------------------------------------------------------------------------------------------------
Version 3.30.3
------------------------------------------------------------------------------------------------------------
Fixes:

• Enable netbiter.net without sending logs does not decrease log file size.
• Automatic restore of modem settings after firmware update will work.
• Fixed compability problem with some SIM cards there modem takes long time to startup.

 Hide

This package contains all necessary files and tools to upgrade Netbiter webSCADA WS200.

There is a PDF describing the update process included in the package.

This package contains all necessary files and tools to upgrade Netbiter webSCADA WS200.

There is a PDF describing the update process included in the package.

Released: 2009-12-10
Version: 3.30.5


Increased http connections and support for Opera, Chrome and Safari

Install this patch by going to Setup - System, then under Firmware select the downloaded file and press Update

Released: 2009-12-10
Version: 3.30.5


Increased http connections and support for Opera, Chrome and Safari

Install this patch by going to Setup - System, then under Firmware select the downloaded file and press Update

Kernel for the Netbiter webSCADA WS200.

Kernel for the Netbiter webSCADA WS200.

This file is can be used in a SNMP manager so messages sent from Netbiter WS100/WS200 can be read in clear text.

The file is a so called MIB file that most SNMP manager can import.

The file is compatible with firmware version 3.20 and later.

This file is can be used in a SNMP manager so messages sent from Netbiter WS100/WS200 can be read in clear text.

The file is a so called MIB file that most SNMP manager can import.

The file is compatible with firmware version 3.20 and later.

Software: Netbiter Config
Version:1.3.1
Operating system: Microsoft Windows XP/Vista

New in version 1.3.1
Potential security flaw corrected.

About the Netbiter Config utility
The Netbiter Config utility is a PC-based configuration utility to set TCP/IP network settings in the Netbiter. This utility has the ability to scan the Ethernet network for connected Netbiter devices and let the user set IP-address, net mask, gateway, DNS and hostname for each unit.

Installation Procedure
Extract the zip archive and run Setup-NetbiterConfig.exe and follow the onscreen instructions. More

Software: Netbiter Config
Version:1.3.1
Operating system: Microsoft Windows XP/Vista

New in version 1.3.1
Potential security flaw corrected.

About the Netbiter Config utility
The Netbiter Config utility is a PC-based configuration utility to set TCP/IP network settings in the Netbiter. This utility has the ability to scan the Ethernet network for connected Netbiter devices and let the user set IP-address, net mask, gateway, DNS and hostname for each unit.

Installation Procedure
Extract the zip archive and run Setup-NetbiterConfig.exe and follow the onscreen instructions.

Scanning for connected devices
First ensure that you have connected the Netbiter device devices you want to install to the same Ethernet network as the PC is connected to. Use standard Ethernet cables, straight-through, to connect Netbiter® WS100 to a hub or switch, and a cross-over cable when connecting directly to a PC.
The Wink button is used to identify a Netbiter device that is connected to the network. The Module status LED will start wink green/red.
When the Netbiter Config utility is started, it will scan the Ethernet network for Netbiter® WS100 devices. All detected devices will be presented in a list in the main window. If you want to force a new scan for devices, you can press the Scan button.

IP IP address of the Netbiter® WS100
SN Subnet mask
GW Default gateway
DHCP Dynamically assigned IP address On/Off
Version Version of the application-software
Type Product type
MAC Ethernet MAC address of the Netbiter® WS100

Changing IP settings
To change IP settings on a detected device, double-click on the device you want to configure in the list of devices. This will open up a dialog where you can enter the desired IP configuration. To obtain necessary information about IP address, subnet mask etc, please contact your network administrator.
Default password for authentication of the new settings is admin and has to be entered to save changed made in Netbiter Config utility.

Host Name Here you can enter a hostname of your device.
IP Address The Netbiter® WS100 IP address.
Subnet mask Mask network
Gateway The default gateway in the network
Primary DNS The primary Domain Name Server
Secondary DNS The primary Secondary Name Server (if it exists)

Pressing Set will cause the Netbiter® WS100 to reboot and after that the new settings will be enabled. Hide

Software: Netbiter Update
Version: 2.82
Operatingsystem: Microsoft Windows XP/Vista

Installation
Extract the zip archive and click netbiterupdate.exe to start the application. More

Software: Netbiter Update
Version: 2.82
Operatingsystem: Microsoft Windows XP/Vista

Installation
Extract the zip archive and click netbiterupdate.exe to start the application.

Usage

1. Attach the Netbiter device to a computer using a null modem serial cable.
2. Start the application
3. Set the COM port to the port that the null modem serial cable is connected to
4. Click Browse and select the file that should be uploaded to the Netbiter device
5. Click Start programming
6. Power on the Netbiter device
7. Click Yes to reboot the device when the down load is ready Hide